ABB STT04 Instruction Manual page 115

Key Display
DATE:
DAY: nn
E N TE R
MONTH: nn
YEAR: nn
E N TE R
OUTPUT TYPE
→ LINEAR
E N TE R
SQUARE ROOT
3/2 FLOW MODE
OUTPUT ACTION:
→ NORMAL
E N TE R
REVERSE
DAMPING:
(0 - 32 SEC)
E N TE R
_ n.nn SECS
ENGINEERING UNIT
→
iH20 mmH2O
E N TE R
PSI BARS
2
Kgcm KPA
LOWER RANGE VAL
nn.nn UNITS
E N TE R
UPPER RANGE VAL
nn.nn UNITS
PTH PRESSURE TRANSMITTER
Enter a day and press
press . Enter a year and press
ENTER
This date can represent the creation date of the con-
figuration, the date the device or element was
installed, or some other significant date.
Select LINEAR.
In this example FUNC GENERATOR is chosen as an
output. Specify five input and output points as a per-
centage of input. The first and last points on the
curve are fixed at 0.00% and 100.00%. The 5 points
are to be between these values.
NOTE: Other output type selections not shown here
include LINEAR, SQUARE ROOT, VOL./ SPHERE
and VOL./CYLINDER.
Use to return to a previous configuration
BACK
screen from any screen in the configuration process.
Select an output action.
Enter a value between 0 and 32 seconds.
Select an engineering unit best suited for the
application.
mmHg
mBAR
Input lower range value using the arrow keys, then
press . Input the upper range value.
ENTER
CREATE/MODIFY CONFIGURATION
Comments
. Enter a month and
ENTER
.
ENTER
D - 3