Table of Contents
Advertisement
PTH PRESSURE TRANSMITTER
Key
INITIALIZE MODE:
→ LOW
E N TE R
FAIL MODE:
→ LOW
E N TE R
ENTER
SECONDARY UNITS
E N TE R
_nnnnnn
SECONDARY L. R.
E N TE R
SECONDARY U. R.
LOWER TEMP ALARM
E N TE R
UPPER TEMP ALARM
STORE THIS
CONFIGURATION?
E N TE R
→ YES
ID TAGNAME
E N TE R
CREATE/MODIFY CONFIGURATION
D - 4
Display
HIGH
HIGH
LAST
nn.nn UNITS
nn.nn UNITS
-40.00°C
85.00°C
NO
READY
Comments
Refer to the Platinum Standard Series Smart Pres-
sure Transmitter PTH instruction for mode descrip-
tion.
Make a selection using the arrow keys.
This is a 6-character alphanumeric designation to
represent values in user familiar units.
To select a character, press the key that has the
desired character. Continue to press the key until the
desired character appears. Use the right arrow key to
move to the next character. Use the left arrow key to
go back to the previous character.
Specify values using the number keypad. The UNITS
displayed will be those designated in the previous
screen. After entering value press
Lower and upper temperature alarms are user con-
figurable alarms. The temperature is based on the
cell. The default alarms setting are shown here. The
defaults are also the lower and upper limits of the
alarm.
NOTE: Use
to return to a previous configura-
BACK
tion screen from any screen in the configuration pro-
cess.
Select YES.
.
ENTER
Hide quick links:
Advertisement
Table of Contents
