OPERATING PROCEDURES
VIEW AND SELECT CONFIGURATION
Key
ID TAGNAME
STT04 CONFIGURATION
2. [CONFIGNAME2]
V IEW
3. CONFIGNAME3
4. CONFIGNAME4
E N TE R
.
.
.
ID TAGNAME2
E N TE R
VIEW AND SELECT CONFIGURATION
4 - 6
Use the view function key to:
Review the parameters of a configuration.
•
Select a new working configuration.
•
Display
The STT04 terminal is ready for operation. The ID
TAGNAME in the left corner is either the configura-
tion name or device name.
READY
Displays configurations. Use the arrow keys to select
the desired configuration. The brackets indicate the
selected configuration.
NOTE: To more quickly scroll through configurations
(three at a time) press the left arrow key to scroll
down or the right arrow key to scroll up.
Press
parameters, until the READY screen appears.
NOTE: To select a configuration without reviewing all
the parameters, press
configuration.
The new working configuration name appears in the
upper left portion of the screen.
READY
Comments
continuously while reviewing the
ENTER
after selecting the
CLEAR