Erase Configuration - ABB STT04 Instruction Manual

OPERATING PROCEDURES
Key
DATE:
DAY: nn
E N TE R
MONTH: nn
YEAR: nn
E N TE R

ERASE CONFIGURATION

Key
CONFIGURATION
C O N F IG
→ ERASE
STT04 CONFIGURATION
1. FT101
E N TE R
2. FT103
3. LT 106
ERASE
ID TAGNAME
E N TE R
→ NO
ERASE CONFIGURATION
4 - 10
Display
ID TAGNAME
READY
Use this function to erase a configuration from the STT04 terminal
memory.
NOTE: This procedure is identical for all device types.
Display
NEW
MODIFY
YES
Comments
This display appears when configuring HART trans-
mitters only. Two digits can be entered for the day,
month and year.
Configuration ID tag name just configured will be in
the upper left corner if the configuration was saved.
This becomes the working configuration.
Comments
Select ERASE.
Displays the stored configurations. Use the scroll
keys to select a stored configuration to view. The ID
tag name that is bracketed indicates it is selected for
deletion.
NOTE: To more quickly scroll through configurations
(three at a time) press the left arrow key to scroll
down or the right arrow key to scroll up.
To erase the selected configuration, use the down
arrow key to move the pointer to YES, then press
.
ENTER
NOTE: To return to the READY screen without eras-
ing a configuration, press
CLEAR
.