How To Use This Instruction; Stt04 Terminal Device Support - ABB STT04 Instruction Manual

INTRODUCTION

HOW TO USE THIS INSTRUCTION

Bold Italic Text
Display Item
KEY
nnn
HOW TO USE THIS INSTRUCTION
1 - 2
Table 1-1. STT04 Terminal Device Support
Type
HART
ABB FSK
NOTE:
1. Used to communicate with unsupported HART devices.
Read this instruction completely through in sequence. It is important
to become familiar with the entire contents of this instruction before
using the STT04 terminal. After reading:
1. Perform the steps in
installed properly before connecting the STT04 terminal.
2. Refer to Section 4 after installation is complete for information on
the use of the STT04 terminal.
3. Refer to the appropriate appendix when configuring and calibrat-
ing a field device.
4. Each device has a configuration worksheet located at the back of
this instruction. Use the worksheets to keep a hard copy record of the
device configuration.
This document uses the following text conventions:
Refers to specific section names through out this instruction.
Shows display items as they appear on the STT04 terminal.
Shows the actual keys that are pressed when in procedural steps.
Indicates numeric values in a display.
Device
EBTH
1
HART Universal
PTH
TB82
TZID/AZH
AVS
BCN
EQN
EQS
PTS
TBN480
TBN580
TBN581
XE/SM/XE
Section 3. Make sure all hardware is