Hart Universal Configuration - ABB STT04 Instruction Manual

HART UNIVERSAL
Key
TRANSMITTER TYPE
TB82 pH
E N TE R
TB82 pION
TZID/AZH → HART UNIV
STT04 CONFIGURATION
[
E N TE R
←PREVIOUS
SELECT MODE:
→ ANALOG
E N TE R
E N TE R
←PREVIOUS
E N TE R
←PREVIOUS

HART UNIVERSAL CONFIGURATION

F - 2
Display
TB82 ORP
TB82 CONC
]
NEXT→
DIGITAL
MESSAGE:
NEXT→
DESCRIPTOR:
NEXT→
Comments
Select HART UNIVERSAL.
Enter a name for the configuration ID tag using up to
8 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
For this example select ANALOG.
Type a descriptive message using up to 32 charac-
ters. This field can be used to note anything of impor-
tance to the device or installation.
To select a character, press the key that has the
desired character. Continue to press the key until the
desired character appears. Use the right arrow key to
move to the next character. Use the left arrow key to
go back to the previous character.
Type a descriptor string using up to 16 characters.
This field can be used for notations about the device
or process.
To select a character, press the key that has the
desired character. Continue to press the key until the
desired character appears. Use the right arrow key to
move to the next character. Use the left arrow key to
go back to the previous character.