Appendix Q - 600T & 600T En Pressure Transmitter; Introduction; Create/Modify Configuration - ABB STT04 Instruction Manual

APPENDIX Q - 600T & 600T EN PRESSURE TRANSMITTER

INTRODUCTION

CREATE/MODIFY CONFIGURATION

Figure Q-1. Configuration Flowchart (600T & 600T EN)
This appendix covers the configuration and calibration functions of
the Type 600T EN Pressure Transmitter.
Refer to OPERATING PROCEDURES
the following functions:
Send configurations.
•
Get configurations.
•
View configurations.
•
A configuration can be created off-line, without a connected field
device. Refer to Figure
function. The following table details the configuration process.
in Section 4 for information on
Select configurations.
•
Erase configurations.
•
Operational functions.
•
Q-1 for an overview of the configuration
INTRODUCTION
Q - 13