Key
OPERATIONAL FUNCTIONS
Display
ID TAGNAME
READY
To completely erase the smart terminal internal memory of stored
configurations:
1. Turn the STT04 terminal OFF.
2. Press and hold the minus ( - ) and enter keys down simulta-
neously.
3. Turn the STT04 terminal ON. A confirmation message appears
confirming the deletion:
4. Turn the STT04 OFF and then ON again to access a READY
screen.
The operational functions of the STT04 terminal apply to all transmit-
ter types. The following functions are covered in this section:
Special feature key.
•
Monitor key.
•
Status key.
•
Rerange.
•
Option key.
•
NOTE: A series of n s in the display portion of the function proce-
dures indicate that an alphanumeric character can be displayed or
entered in that position.
OPERATING PROCEDURES
Comments
* ERASING CONFIGS *
- COMPLETE -
OPERATIONAL FUNCTIONS
4 - 11