Selecting Characters From The Keypad - ABB STT04 Instruction Manual

OPERATING PROCEDURES
Key
E N TE R
NO ANALOG DEV FOUND.
POLL FOR DIGTAL DEV?
E N TE R
→ NO

SELECTING CHARACTERS FROM THE KEYPAD

Key
CONFIGURATION
→ NEW
C O N F IG
DEVICE TYPE
E N TE R
→ HART
TRANSMITTER TYPE
→ PTS
E N TE R
SELECTING CHARACTERS FROM THE KEYPAD
4 - 4
Display
SCANNING FOR
SMART
FIELD DEVICES
NO SMART
FIELD DEVICE
RESPONDING
YES
CHOOSE A TAG
READY
Character entry into the STT04 terminal is done using the numeric
keypad. The following example details how character entry is per-
formed.
Display
MODIFY
ERASE
EQS
BCN EQN
AVS TBN480
Comments
STT04 terminal attempting to communicate with a
field device. If the terminal is connected to a field
device, the READY screen appears. If the terminal is
not connected to a device, it searches for configura-
tions that have been stored.
Appears only if field devices are not connected. The
STT04 terminal searches for configurations in its
internal memory. If configurations are present, a list
of ID tag names appears.
Only appears if HART is selected for communication
format and no analog field devices are connected.
Choose YES to poll for digital devices.
A configuration can be created. Refer to the appendi-
ces at the back of this instruction for configuration
procedures for all supported devices.
Comments
Select NEW to create a configuration.
Select HART.
Select 600T.