Table of Contents
Advertisement
APPENDIX E - PTS PRESSURE TRANSMITTER
INTRODUCTION
CREATE/MODIFY CONFIGURATION
ID TAG
SELECT MODE
DIGITAL
ENTER
CHANNEL
NUMBER
C
O
N
F
I
G
U
R
E
SELECT
SELECT FAIL
INITIALIZE
MODE
MODE
This appendix covers the configuration and calibration functions of
the PTS Pressure Transmitter.
Refer to
OPERATING PROCEDURES
the following functions:
Send configurations.
•
Get configurations.
•
View configurations.
•
NOTE: To change calibration or configuration parameters of a smart
field device that is connected to an IMFBS01 module, the device
must be taken off-line. This is done at the INFI 90 OPEN console.
A configuration can be created off-line, without a connected field
device. Refer to Figure
function. The following table details the configuration process.
SELECT
ANALOG
SELECT
TRANSMITTER
OUTPUT TYPE
TYPE
ENTER
ENTER
SECONDARY
SECONDARY
UNITS
LOWER RANGE
Figure E-1. Configuration Flowchart (PTS)
in Section 4 for information on
Select configurations.
•
Erase configurations.
•
Operational functions.
•
E-1
for an overview of the configuration
SELECT
ENTER DAMPING
OUTPUT
CONSTANT
ACTION
ENTER
ENTER LOWER
SECONDARY
TEMPERATURE
UPPER RANGE
ALARM
SELECT
ENGINEERING
UNITS
ENTER LOWER
RANGE VALUE
ENTER UPPER
RANGE VALUE
ENTER UPPER
TEMPERATURE
ALARM
SAVE
CONFIGURATION
T01341A
INTRODUCTION
E - 1
Hide quick links:
Advertisement
Table of Contents
