Number Of Response Preambles - ABB STT04 Instruction Manual

Key Display
ID TAGNAME
E N TE R
READY

Number of Response Preambles

Use this function to set the number of response preambles to be sent
from the device at the start of the response.
Key Display
FIX/CANCEL OUTPUT
SENSOR DATA
S PE C IA L
FE ATU R E → HART SP. FEATURE
SENSOR DATA
MASTER RESET
E N TE R
→ # RESP PREAMBLES
RST CFG CHANGED
# RESP. PREAMBLES
E N TE R
ID TAGNAME
E N TE R
READY
If any warnings or messages exist pertaining to this
device, the terminal will list the message.
Select HART SP. FEATURE.
Select # RESP PREAMBLES.
Enter a number between 5 and 20. The communica-
tion device requires a certain value.
n
The default value is 5 response preambles.
TB82 TRANSMITTER
Comments
Comments
SPECIAL FEATURE
N - 15