ABB STT04 Instruction Manual page 169

TBN580 TRANSMITTER
Key
CONFIGURATION
→ NEW
C O N F IG
DEVICE TYPE
E N TE R
→ ABB FSK
TRANSMITTER TYPE
BCN
E N TE R
AVS
→ TB580 pH
STT04 CONFIGURATION
[
E N TE R
←PREVIOUS
E N TE R
pH SENSOR INPUT
→ STANDARD
E N TE R
CREATE/MODIFY CONFIGURATION
K - 2
Display
MODIFY
ERASE
HART
EQN
TB480 cond
TB581 ORP
]
NEXT→
SELECT MODE:
→ ANALOG
DIGITAL
ANTIMONY
Comments
To create a new configuration, select NEW. To mod-
ify an existing configuration, select MODIFY. The
screen sequence is the same, however, the MODIFY
screens will appear with the values and cursor posi-
tions as originally configured.
Select ABB FSK as device type.
Use the down arrow key and select TB580 pH.
Enter a name for the configuration ID tag using up to
14 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
Select ANALOG.
For this example, select STANDARD.
STANDARD: thermo-isopotential 7.0 pH;
slope 59.15 mV at 25°C.
ANTIMONY: isopotential 1.5 pH; slope 51 mV
at 25°C.
NOTE: If after selecting ANTIMONY, the STT04 ter-
minal branches to a TEMPERATURE DISPLAY
UNITS selection screen, choose the desired temper-
ature unit.