ABB STT04 Instruction Manual page 137

BCN PRESSURE TRANSMITTER
Key
LOWER RANGE VAL.
E N TE R
UPPER RANGE VAL.
INITIALIZE MODE:
→ LOW
E N TE R
E N TE R
ENTER
SECONDARY UNITS
E N TE R
_nnnnnn
SECONDARY L. R.
E N TE R
SECONDARY U. R.
STORE THIS
CONFIGURATION?
E N TE R
→ YES
ID TAGNAME
E N TE R
CREATE/MODIFY CONFIGURATION
G - 4
Display
nn.nn UNITS
nn.nn UNITS
HIGH
FAIL MODE
→ LOW
HIGH
LAST
nn.nn UNITS
nn.nn UNITS
NO
READY
Comments
Input lower range value using the number keys and
press . Input the upper range value. The
ENTER
UNITS displayed will be those designated in the pre-
vious screen.
Select LOW using the arrow keys.
Refer to the Smart Pressure Transmitter BCN
instruction for mode description.
Select LOW using the arrow keys.
This is a 6 character alphanumeric designation to
represent values in user familiar units.
To select a character, press the key that has the
desired character. Continue to press the key until the
desired character appears. Use the right arrow key to
move to the next character. Use the left arrow key to
go back to the previous character. Press
when finished.
Specify secondary values using the number keys.
The UNITS displayed will be those designated in the
previous screen. After entering a value press
.
ENTER
Make a selection using the arrow keys.
The Configuration ID tag name just configured will be
in the upper left corner if the configuration is saved. It
becomes the working configuration.
ENTER