ABB STT04 Instruction Manual page 145

Key Display
RTD TYPE
→ 100Ω Pt 385
E N TE R
100Ω Pt 392
NUMBER OF ELEMENTS:
→ 2-WIRE
E N TE R
3-WIRE
DUAL
ENGINEERING UNITS
→ °C
E N TE R
°F
°K
OUTPUT TYPE:
→ LINEAR
E N TE R
FUNC GENERATOR
OUTPUT ACTION:
→ NORMAL
E N TE R
REVERSE
DAMPING:
(0-32 SEC)
E N TE R
_nn.nn SECS
LOWER RANGE VAL.
nn.nn UNITS
E N TE R
UPPER RANGE VAL.
nn.nn UNITS
INITIALIZE MODE:
→ LOW
E N TE R
HIGH
EQN TEMPERATURE TRANSMITTER
Comments
Select 100Ω Pt 385 type.
Select 2-WIRE.
Choose the desired temperature unit.
Select LINEAR.
If FUNC GENERATOR is selected, specify 5 input
and output points between 0 and 100%.
Refer to the Smart Electronic Temperature Trans-
mitter EQN instruction for description.
Enter a value between 0 and 32. Refer to the Smart
Electronic Temperature Transmitter EQN instruc-
tion for description.
Enter the lower range temperature value and press
. Input the upper range value.
ENTER
Refer to the Smart Electronic Temperature Trans-
mitter EQN instruction for description.
CREATE/MODIFY CONFIGURATION
H - 3