ABB STT04 Instruction Manual page 124

PTS PRESSURE TRANSMITTER
Key
CONFIGURATION
→ NEW
C O N F IG
DEVICE TYPE
→ ABB FSK
E N TE R
TRANSMITTER TYPE
→ PTS
E N TE R
STT04 CONFIGURATION
[
E N TE R
←PREVIOUS
SELECT MODE:
→ ANALOG
E N TE R
OUTPUT TYPE:
→ LINEAR
E N TE R
OUTPUT ACTION:
→ NORMAL
E N TE R
DAMPING:
(0 - 32 SEC)
E N TE R
CREATE/MODIFY CONFIGURATION
E - 2
Display
MODIFY
ERASE
HART
EQS
BCN EQN
AVS TB480 cond
]
NEXT→
DIGITAL
SQUARE ROOT
3/2 FLOW MODE
REVERSE
_ nn.nn SEC
Comments
Select NEW to create a configuration. To modify an
existing configuration, select MODIFY. The screen
sequence is the same, however, the MODIFY
screens will appear with the values and arrow posi-
tions as they were originally configured.
Select ABB FSK.
Use the down arrow key to select PTS.
Enter a name for the configuration ID tag using up to
14 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
Select ANALOG.
NOTE: The DIGITAL selection should only be made
when using an IMFBS01 field bus I/O module. A
CHANNEL # prompt appears when DIGITAL is
selected.
Select LINEAR. For a function generator example,
refer to Appendix G.
Use to return to a previous configuration
BACK
screen from any screen in the configuration process.
Use the arrow keys to select an output action.
Enter a value between 0 and 32 seconds.