ABB STT04 Instruction Manual page 6

APPENDIX - 600T & 600TEN PRESSURE TRANSMITTER
INTRODUCTION
This appendix covers the configuration and calibration functions of the Type 600T EN Pressure Transmitter.
Refer to SECTION 4 - OPERATING PROCEDURES for information on the following functions:
•
•
•
CREATE/MODIFY CONFIGURATION
A configuration can be created off-line, without a connected field device. Refer to Figure 1 for an overview of the
configuration function. The following table details the configuration process.
Send configurations.
Get configurations.
View configurations.
Figure 1. Configuration Flowchart (600T & 600T EN)
ADDENDUM
• Select configurations.
• Erase configurations.
• Operational functions.
4