Table of Contents
Advertisement
Menu Item
Database
View Configurations
Transfer Configurations
Utilities
Special Advanced
Deleting a User
Table O-1. User Level Accessibility
Operation
New
Open
Exit
Connected STT04
Database files
Upload from STT04
Download to STT04
Test Communication
Change STT04 Name
Report diagnostics
Upgrade firmware
Upgrade boot code
Set COM Port
9. To set user name and password to be case sensitive, click Make
User Name and Password Case Sensitive.
NOTE: Case sensitivity provides added security, however it can
become a nuisance to the entry process. In addition to remembering
the user name and password, the user must also remember whether
they are all lower case, all upper case, initial capitals, or some other
variation. It is recommended that this box be left unchecked to avoid
unnecessary confusion.
10. Click OK.
11. Remove the Password Key disk and store in a safe and secure
location with limited access. Only Supervisor security level personnel
should have access to the Password Key disk.
Use this function to delete a user name.
1. Start the Password program. Refer to
Program.
2. Insert the Password Key disk into the appropriate floppy disk
drive.
3. Click Key and type the appropriate floppy disk drive letter (i.e., A:)
and click Verify. The screen shown in Figure
4. Click Password and select Delete. A list of user names appears.
5. Select the user name to remove and click Delete.
STT04 DOWNLINK SOFTWARE
Access Level
Supervisor
Engineer
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Starting the Password
O-1
appears.
Technician
X
X
X
X
X
X
X
SECURITY
O - 3
Hide quick links:
Advertisement
Table of Contents
