Operating Mode - ABB STT04 Instruction Manual

Key
MAKE CHANGES
PERMANENT?
E N TE R
→ YES
ID TAGNAME
E N TE R

Operating Mode

Key
DEVICE INFORMATION
CONTROL PARAMETERS
S PE C IA L
FE ATU R E
CHARACTERIST. CURVE
→OPERATING MODE
→ CONTOLLING, AUTO
CONTROLLING, FIXED
E N TE R
MANUAL
LOCAL
MAKE CHANGES
PERMANENT?
E N TE R
→
Display
NO
READY
Use this function to change operating modes. The screen flow of this
section applies for TZID/AZH positioners with revision 5.x or greater.
Display
NO
YES
TZID/AZH POSITIONER
Comments
Select YES to save changes.
Comments
Select OPERATING MODE.
Use this screen to select the operating mode.
Select AUTO for automatic adaptation of the control
parameters.
Select FIXED for fixed control parameters.
Select MANUAL for manual actuation of control ele-
ment.
Select LOCAL to switch over the device from an
externally selected operating mode to the internally
selected mode.
Select YES to change modes.
SPECIAL FEATURE
M - 13