Table of Contents
Advertisement
Key
FLOW DIRECTION:
→ FWD AND REV
E N TE R
EMPTY PIPE DET.:
→ OFF
E N TE R
UPPER PV ALARM
E N TE R
LOWER PV ALARM
STORE THIS
CONFIGURATION?
E N TE R
→ YES
ID TAGNAME
E N TE R
CALIBRATION
Display
FWD ONLY
ON
nnn.nn UNITS
nnn.nn UNITS
NO
READY
This section details the calibration functions of the STT04 terminal
while interfacing an XM/SM/XE Mag Flow Meter. There are two types
of calibration functions:
Empty pipe detector.
•
D-to-A adjust.
•
NOTES:
1.
When calibrating, a field device must be connected to the
STT04 terminal.
2.
To change calibration or configuration parameters of a field
device that is connected to an IMFBS01 module, the transmitter
must be taken off-line. This is done at the INFI 90 OPEN console.
Refer to Figure
I-2
for an overview of the calibration functions.
XM/SM/XE MAGNETIC FLOWMETER
Comments
Make a selection using the arrow keys.
Make a selection using the arrow keys.
Specify values using the number keys. The UNITS
displayed will be those designated in a previous
screen. After entering a value press
Make a selection using the arrow keys.
.
ENTER
CALIBRATION
I - 5
Hide quick links:
Advertisement
Table of Contents
