ABB STT04 Instruction Manual page 209

Key Display
DATE:
DAY: nn
E N TE R
MONTH: nn
YEAR: nnnn
OUTPUT TYPE:
→ LINEAR
E N TE R
FUNC GENERATOR
DAMPING:
(0 - 100 sec)
E N TE R
LOWER RANGE VAL
nn.nn UNITS
E N TE R
UPPER RANGE VAL
nn.nn UNITS
TEMP COMP TYPE
→ MANUAL
E N TE R
AUTOMATIC
AUTO SOL. (ADV)
ENTER
TEMPERATURE:
E N TE R
nn.nn UNITS
STORE THIS
CONFIGURATION?
E N TE R
NO
→ YES
TB82 TRANSMITTER
Comments
Enter a day and press
ENTER
press . Enter a year.
ENTER
This date can represent the creation date of the con-
figuration, the date the device or element was
installed, or some other significant date.
Select Linear.
The OUTPUT TYPE screen does not appear when
the transmitter type is TB82 CONC.
NOTE: Remote communications do not support the
function generator feature for the TB82. Function
generator output points must be specified locally at
the device.
Enter a value between 0 and 100. Damping is used
to smooth out a noisy signal. Use a low value for a
clean signal and a higher number for noisy signals.
Default setting is 0.5 seconds.
The DAMPING screen does not appear when the
transmitter type is TB82 CONC.
Input lower range value (4 mA) using the arrow keys,
then press . Input the upper range value
ENTER
(20 mA).
The range values screen does not appear when the
transmitter type is TB82 CONC.
Select a temperature compensation type.
This screen appears for TB82 pH.
NOTE: AUTO SOL. (ADV) is only available for TB82
transmitters operating in advance mode.
Enter a temperature.
This screen appears for TB82 pH and only if MAN-
UAL is the temperature compensation type.
Select YES.
CREATE/MODIFY CONFIGURATION
. Enter a month and
N - 3