ABB STT04 Instruction Manual page 158

TBN480 CONDUCTIVITY TRANSMITTER
Key
CONFIGURATION
→ NEW
C O N F IG
DEVICE TYPE
→ ABB FSK
E N TE R
TRANSMITTER TYPE
PTS
BCN
AVS → TB480 cond
E N TE R
STT04 CONFIGURATION
[
E N TE R
←PREVIOUS
E N TE R
ANALYZER TYPE
→ GENERAL
E N TE R
CREATE/MODIFY CONFIGURATION
J - 2
Display
MODIFY
ERASE
HART
EQS
EQN
]
NEXT→
SELECT MODE:
→ ANALOG
DIGITAL
PURE H2O COND
CONCENTRATION
Comments
Select NEW to create a new configuration. To modify
an existing configuration, select MODIFY. The
screen sequence is the same, however, the MODIFY
screens will appear with the values and cursor posi-
tions as originally configured.
Select ABB FSK.
Use the down arrow key to select TBN480 cond.
Enter a name for the configuration ID tag using up to
14 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
Select ANALOG.
Select analyzer type.