Reset Totals - ABB STT04 Instruction Manual

SMART POSITIONER

Reset Totals

Key
FIX SET POINT
CANCEL FIX SET
S PE C IA L
PID PARAMETERS
FE ATU R E
STANDARD CONFIG
→ RESET TOTALS
ID TAGNAME
E N TE R
SPECIAL FEATURE KEY FUNCTIONS
A - 12
The positioner has a travel counter that counts each movement of the
positioner. The travel counter increments one for every movement
that amounts to five percent of span. The total number of movements
is used to help determine when maintenance is performed on final
control elements. The reset totals function sets the travel counter to
zero.
Display
Select RESET TOTALS.
The travel counter is set to zero. To check the travel
counter, refer to
READY
Comments
Status Check in Section 4.