ABB STT04 Instruction Manual page 100

EBTH TEMPERATURE TRANSMITTER
Key
LOWER RANGE VAL
E N TE R
UPPER RANGE VAL
E N TE R
INITIALIZE MODE:
→ LOW
E N TE R
FAIL MODE:
→ LOW
E N TE R
ENTER
SECONDARY UNITS
E N TE R
SECONDARY L.R.
E N TE R
SECONDARY U.R.
E N TE R
LOWER TEMP ALARM
E N TE R
UPPER TEMP ALARM.
E N TE R
CREATE/MODIFY CONFIGURATION
B - 4
Display
nn.nn C
o
nn.nn C
o
HIGH
HIGH
LAST
nnnnnn
_nn.nn UNITS
nn.nn UNITS
_nn.nn UNITS
nn.nn UNITS
Comments
Enter the lower range temperature value and press
. Input the upper range value.
ENTER
Select an initialization mode using the arrow keys.
Refer to the Platinum Standard Series Smart Tem-
perature Transmitter EBTH instruction for descrip-
tion.
Select a fail mode using the arrow keys.
Refer to the Platinum Standard Series Smart Tem-
perature Transmitter EBTH instruction for descrip-
tion.
Enter up to 6 characters. Use familiar units to
describe the output.
To select a character, press the key that has the
desired character. Continue to press the key until the
desired character appears. Use the right arrow key to
move to the next character. Use the left arrow key to
go back to the previous character.
Input the lower range value and press
Input the upper range value.
Input the lower temperature alarm value and press
.
ENTER
Input the upper temperature alarm value and press
ENTER
.
.
ENTER