Send Configuration - ABB STT04 Instruction Manual

SEND CONFIGURATION

Key
STT04 CONFIGURATION
1. [CONFIGNAME]
S EN D
2. CONFIGNAME2
C O N FIG
3. CONFIGNAME3
SELECT TRANSMITTER
[nnnnnnnnnnnnnnnnnn]
E N TE R
E N TE R
ID TAGNAME
Use the send configuration function key to send a configuration from
the terminal to a connected device.
Display
SENDING
CONFIGURATION
READY
OPERATING PROCEDURES
Comments
A complete list of configurations display (three per
screen). To select from the existing configurations,
use the arrow keys to scroll through the list.
NOTE: To more quickly scroll through configurations
(three at a time) press the left arrow key to scroll
down or the right arrow key to scroll up.
Displays the ID tag name of the selected transmitter.
Configuration was sent successfully.
SEND CONFIGURATION
4 - 7