Reset Configuration Change Flag; Problem And Error Codes (Tb82 - ABB STT04 Instruction Manual

TB82 TRANSMITTER
Key
S PE C IA L
FE ATU R E → HART SP. FEATURES
SENSOR DATA
MASTER RESET
E N TE R
# RESP PREAMBLES
→ RST CFG CHANGED FLG
ID TAGNAME
E N TE R

PROBLEM AND ERROR CODES (TB82)

PROBLEM AND ERROR CODES (TB82)
N - 16

Reset Configuration Change Flag

Use this function to reset the change flag. If a change is made to a
configuration a change flag is set, indicating a change to the original
configuration. This function removes the change flag.
Display
FIX/CANCEL OUTPUT
SENSOR DATA
READY
Table N-1 lists the TB82 transmitter problem codes that can appear
on the STT04 terminal. Problem codes result from fault conditions
that affect the performance of the device.
Table N-2 lists the TB82 transmitter error codes that can appear on
the STT04 terminal. Error codes result from fault conditions that ren-
der the device inoperable. All codes are listed in alphabetical order.
Comments
Select HART SP. FEATURE.
Select RST CFG CHANGED FLG to reset the
change flag.