TB82 TRANSMITTER
Key
ADJUST TO 20 mA
E N TE R
THEN HIT ENTER
ID TAGNAME
E N TE R
SPECIAL FEATURE
Sensor Data
Key
→ SENSOR DATA
S PE C IA L
FE ATU R E
PROCESS
E N TE R
SLOPE :
OFFSET:
TEMPERATURE
E N TE R
SLOPE :
OFFSET:
ID TAGNAME
E N TE R
SPECIAL FEATURE
N - 12
Display
READY
The following section details unique special feature functions for the
TB82.
This procedure describes how to view sensor data.
Display
FIX/CANCEL OUTPUT
HART SP. FEATURE
nn.nnnn
nn.nnnn
nn.nnnn
nn.nnnn
READY
Comments
Use the arrow keys to adjust output shown on the
meter to 20 mA.
Comments
Select SENSOR DATA.
View slope and offset of the process.
Valid slope values are 40% to 150%. Valid offset val-
ues are -1,000 to +1,000 mV.
View slope and offset of the temperature.
Valid range for slope is 0.2 to 1.5. Valid range for off-
set is -40° to 40°C.