Digital Lcd Integral Display View Setting - ABB 364G Series Manual

Digital LCD Integral Display view setting

To view the menu in a specific language:
Navigate the Digital LCD Integral Display menu, select
available. To modify select
OK.
Digital LCD Integral Display Keys sequence to set the language: 3 – 1 – Edit
To modify the Operator view:
Navigate the Digital LCD Integral Display menu, select
available. To modify sel ect
and down keys and confirm with OK.
One Line
One Line + Bargraph
Two Lines
Two Lines + Bargraph
Digital LCD Integral Display Keys sequence to modify the Operator View: 3 – 2 – Edit
To define the Variable 1 in the Display:
Navigate the Digital LCD Integral Display menu, select
will be available. To modify select
the up and down keys and confirm with OK.
Pressure
Output %
Current Out
Engineering Output
Sensor Temperature
Digital LCD Integral Display Keys sequence to modify the define the Variable 1: 3 – 3 – Edit
To define the Variable 2 in the Display:
Navigate the Digital LCD Integral Display menu, select
will be available. To modify select
the up and down keys and confirm with OK.
Pressure
Output %
Current Out
Engineering Output
Sensor Temperature
Digital LCD Integral Display Keys sequence to modify the define the Variable 2: 3 – 4 – Edit
To define the Bargraph variable in the Display:
Navigate the Digital LCD Integral Display menu, select
the Bargraph will be available. To modify select
keys for the Bargraph view (see the following table) and confirm with OK.
Pressure
Output %
Current Out
Engineering Output
Sensor Temperature
Digital LCD Integral Display Keys sequence to modify the define the Bargraph variable: 3 – 5 – Edit
then scroll the desired language with the up and down keys and confirm with
Edit
Edit then scroll the desired Operator view (see the following table) with the up
to view the Variable 1 as defined in the Display
to view the Variable 1 as defined in the Display and the Bargraph
proportional with the variable full scale
to view the Variable 1 and the Variable 2 as defined in the Display
to view the Variable 1 and the Variable 2 as defined in the Display
and the Bargraph proportional with the variable full scale
Edit then scroll the desired Variable 1 view (see the following table) with
to view the Primary Variable value
to view th Primary Variable in percentage
to view the current Output value in mA
to view the Output value in Engineering Units
to view the Sensor Temperature value
Edit then scroll the desired Variable 2 view (see the following table) with
to view the Primary Variable value
to view th Primary Variable in percentage
to view the current Output value in mA
to view the Output value in Engineering Units
to view the Sensor Temperature value
Edit
to view the Primary Variable value
to view th Primary Variable in percentage
to view the current Output value in mA
to view the Output value in Engineering Units
to view the Sensor Temperature value
Display > Language, and the used language will be
Display > Operator
Display > Display Variable
Display >
Display Variable
Display > Display Bargraph, and the used variable in
then scroll the desired Variable with the up and down
364Ax-Gx Instruction Manual
View, and the used view will be
1, and the used varia ble
2, and the used varia ble
37