Setting Up Connection Using WPS Push Button Mode
If your wireless router supports WPS push button mode, you can easily set up a connection with a WPS button.
How to operate the wireless router may vary on each device. See the instruction manuals for your
networking device for help.
to select <Network Settings>, and press
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Logging on to the Machine(P. 34)
Select <Wireless LAN Settings>, and press
If the <Do you want to enable the wireless LAN?> message is displayed, select <Yes>, and press
Read the message that is displayed, and press
Select <WPS Push Button Mode>, and press
Select <Yes>, and press
A PIN code is generated.
Press and hold the WPS button on the wireless router.
The button must be pressed within 2 minutes after performing step 6.
Depending on the networking device, you may need to press and hold the button for 2 seconds or longer.
See the instruction manuals for your networking device for help.