Setting Up Connection Using Wps Push Button Mode - Canon imageCLASS MF242dw User Manual

Setting Up Connection Using WPS Push Button Mode

If your wireless router supports WPS push button mode, you can easily set up a connection with a WPS button.
How to operate the wireless router may vary on each device. See the instruction manuals for your networking
device for help.
1
Press .
2
Use / to select <Network Settings>, and press
● If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press
the System Manager PIN(P. 226)
3
Select <Wireless LAN Settings>, and press
● If the <Enable the wireless LAN?> message is displayed, select <Yes>, and press
● If the <Direct Connection will be disabled. Is it OK?> message is displayed, select <Yes>, and press
4
Read the message that is displayed, and press
5
Select <WPS Push Button Mode>, and press
6
Select <Yes>, and press
7
Press and hold the WPS button on the wireless router.
The button must be pressed within 2 minutes after pressing
● Depending on the networking device, you may need to press and hold the button for 2 seconds or longer.
See the instruction manuals for your networking device for help.
Network
.
.
171
.
.
.
.
in step 6.
1525-03A
. Setting
.