Figure 2-19 Installation Of Mounting Bracket - NEC NEAX2000 IVS2 Installation Manual

Integrated voice server

Hide thumbs Also See for NEAX2000 IVS2:

Table of Contents

CHAPTER 2 INSTALLATION

Floor Standing Installation

• Installation of MOUNTING BRACKET

Install the MOUNTING BRACKET to the top-stack PIM if the equipment is stacked with four

or more modules.

(1) Remove four screws located on the rear side of the top-stack PIM.

(2) Secure the MOUNTING BRACKET to the PIM with the removed screws.

(3) Secure the PIM to the wall or ceiling using wires, chains and eyebolts (locally provided).

Figure 2-19 Installation of MOUNTING BRACKET

MOUNTING BRACKET

NEAX2000 IVS

Installation Procedure Manual

ND-70928 (E), Issue 3.0