Table 15 Wago-Specific Parameters; Table 16 Process Data Structure; Table 17 Status Message Structure - WAGO 2789-9080 Product Manual

Fieldbus Description
4.2.2 Specific Module Parameters of the WAGO Power Supply Pro 2
The product uses the following WAGO-specific parameters:
Index
12001
12002
12003
12004
12005
4.2.3 Data Structure for WAGO Power Supplies Pro 2
The product has the following structure:
• 5-byte input process data
• 1-byte output process data
The structure of the input and output process data is explained below.
Input Process Data
The product has the following input process data (5 bytes):
Byte
0
1 ... 2
3 ... 4
Bit
0
1
2
3
4
5 ... 7
Output Process Data
The product has the following output process data (1 byte):
18 | Version: 1.1.0
Communication Module IO-Link
Subindex Parameters
0 Part number
module
0 Part number ex-
tension (module)
0 Hardware version
module
0 Firmware version
module
0 Configuration ID
module
Description
Status messages (see Table "Status Message Structure")
Measured output current 0.000 ... 65.535 A in steps of 1 mA
Measured output voltage 0.000 ... 65.535 V insteps of 1 mV
Description
DC OK
Set when the output voltage is OK.
Overtemperature shutdown T ≥ T
No output voltage
Short circuit at output
Digital output set
Reserved
Table 15: WAGO-specific parameters
Data Type Data length
(Bytes)
StringT
StringT
StringT
StringT
UIntegerT
max
2789-9080
Description
8 Module item
number
8 Item number ex-
tension of the
module
2 HW Release In-
dex of the mod-
ule in the "XX"
format
8 FW Revision of
the module in the
"XX.XX.XX" for-
mat
4 Configuration ID
of the module
Table 16: Process Data Structure
Table 17: Status Message Structure