Wago Webserver I/O Field; Table 22 Parameterization Overview - WAGO 765-1103/100-000 Manual

765-1103/100-000
Tool
PROFINET IO-Controller
WAGO I/O Field Web-
server
WAGO App I/O Field
WAGO IO-Link Configura-
tor
Note
Parameters via PROFINET are always rewritten upon restart
Each time PROFINET communication starts up, the IO-Controller transfers the configura-
tion and parameters to the 765 Series module. Port configuration parameters that were
set by the WAGO I/O Field Webserver, the WAGO I/O Field app or the OPC UA client are
overwritten. Parameters via PROFINET take precedence.
If you have changed parameters of the port configuration via the WAGO I/O Field Web-
server, the WAGO App I/O Field, the WAGO IO-Link Configurator or the OPC UA Client,
please note that these changes are initially applied by the module, but the I/O controller
overwrites the port configuration again at the next start-up. If you want to change parame-
ters of the port configuration, set them in the configuration software of the I/O controller.

5.5.2 WAGO Webserver I/O Field

The WAGO I/O System Field module has an integrated Webserver. It can be accessed
with a standard Web browser in order to use the following functions:
• Display port information for ports X01, X02 etc.
• Display and modify module settings.
• User setup and management, as well as user login and logout
• Reset module to factory settings and restart firmware.
• Simulating inputs; forcing outputs
Examples of port information include:
• Display current measured values for the digital outputs: temperature, voltage, current
and state on pins 1, 2 and 4
• Display the status information for the entire port
• Configure ports, e.g. set operating mode
• Show process data
The module settings include:
• Select method for obtaining IP address
• Select the origin of the configuration data used
• Display and enter maintenance information
• Reset module to factory settings.
• Load firmware onto the module
• Display and set parameters for Bluetooth
Product manual | Version: 2.2.0
16DO FLD PN DC 24V 2.0A
PROFINET Modules and Port Configuration
Submodules
The PROFINET IO-Con- The IO-Controller sets the parameter the user selects
troller configures the on the basis of the parameters in the GSDML file.
PROFINET modules and These parameters configure each individual port and
submodules of the Series determine whether the port is used as a digital input or
765 module. digital output (or is disabled).
– Yes
– Yes
– Yes
®
connection to the module
Functions
Table 22: Parameterization Overview
27