HEIDENHAIN MANUALplus 620 Technical Manual page 1086

Preliminary
input values
Machine parameters in the configuration editor and
preliminary input value
System
CfgFilter
defaultPosition
shape:
frequency:
defaultCutterLoc:
Channels
ChannelSettings
CH_NC
CfgLaPath
minPathFeed:
minCornerFeed:
maxPathJerk:
maxG1Feed:
pathTolerance:
maxPathYank:
1086
 Enter the following temporary input values when you begin commissioning:
Meaning
Triangle Type of nominal position value filter
40 Frequency of the position filter
Deactivated CLP filter: Deactivated
(delete from configuration)
0 Minimum feed rate on the path
0 Minimum feed rate at corners
5 Maximum jerk on the path
99,999 Max. machining feed rate
0.01 Tolerance for contour transitions
1000000 Maximum yank on the path
HEIDENHAIN Technical Manual MANUALplus 620