Connect the Ethernet cable to any of the ports on the front panel of the switch and to the Ethernet
port on the PC.
Logging onto the Web User Interface
To access the Web UI, simply open a web browser and enter the switch's default IP address into the
address bar. Make sure that the IP address of the management PC is in the same subnet as the IP
address of the switch you are trying to connect to.
NOTE: The default IP address of the switch is 10.90.90.90, with a subnet mask
of 255.0.0.0.
NOTE: The default username is 'admin' and password is 'admin'.
After successfully connecting to the Web UI, the Smart Wizard will be launched.
D-Link DGS-1100 MP/MPP Series Switch User Manual
17