Edge-Core ECS4660-28F Management Manual page 308

| Class of Service
C 10
HAPTER
Layer 2 Queue Settings
weighted service for the remaining queues. Use this parameter to
specify the queues assigned to use strict priority. (Default: Disabled)
Weight – Sets a weight for each queue which is used by the WRR
◆
scheduler. (Range: 1-15; Default: Weights 1, 2, 4, 6, 8, 10, 12 and 14
are assigned to queues 0 - 7 respectively)
W I
EB NTERFACE
To configure the queue mode:
Click Traffic, Priority, Queue.
1.
Select a port or trunk.
2.
Set the queue mode.
3.
If the weighted queue mode is selected, the queue weight can be
4.
modified if required.
If the queue mode that uses a combination of strict and weighted
5.
queueing is selected, the queues which are serviced first must be
specified by enabling strict mode parameter in the table.
Click Apply.
6.
Figure 134: Setting the Queue Mode (Strict)
Figure 135: Setting the Queue Mode (WRR)
– 308 –