Table 19: Mapping Internal Phb/Drop Precedence To Cos/Cfi Values - Edge-Core ECS4660-28F Management Manual

CoS – Class-of-Service value. (Range: 0-7)
◆
CFI – Canonical Format Indicator. Set to this parameter to "0" to
◆
indicate that the MAC address information carried in the frame is in
canonical format. (Range: 0-1)

Table 19: Mapping Internal PHB/Drop Precedence to CoS/CFI Values

Drop Precedence
Per-hop Behavior
0
1
2
3
4
5
6
7
W I
EB NTERFACE
To map internal per-hop behavior and drop precedence values to CoS
values in the web interface:
Click Traffic, Priority, DSCP to CoS.
1.
Select Configure from the Action list.
1.
Select a port.
2.
Select any PHB and drop precedence pair within the internal priority
3.
map, and then set the corresponding CoS/CFI pair.
Click Apply.
4.
Figure 144: Configuring DSCP to CoS Egress Mapping
– 319 –
C
HAPTER
Layer 3/4 Priority Settings
0 (green) 1 (red)
(0,0) (0,0)
(1,0) (1,0)
(2,0) (2,0)
(3,0) (3,0)
(4,0) (4,0)
(5,0) (5,0)
(6,0) (6,0)
(7,0) (7,0)
| Class of Service
10
3 (yellow)
(0,0)
(1,0)
(2,0)
(3,0)
(4,0)
(5,0)
(6,0)
(7,0)