Basic; Tasks; Displaying System Information - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:

Table of Contents

This chapter describes the following topics:

including contact information.

Displaying Hardware/Software Versions

power status, and firmware versions

Configuring Support for Jumbo Frames

Displaying Bridge Extension Capabilities

Managing System Files

or configuration files, and set the system start-up files.

Setting the System Clock

specified SNTP servers.

Configuring The Console Port

Configuring Telnet Settings

Displaying CPU Utilization

Displaying Memory Utilization

Resetting the System

time, after a specified delay, or at a periodic interval.

Use the System > General page to identify the system by displaying

information such as the device name, location and contact information.

"System Management Commands" on page 595

"SNMP Commands" on page 657

– Provides basic system description,

– Shows the hardware version,

– Enables support for jumbo

– Shows the bridge extension

– Describes how to upgrade operating software

– Sets the current time manually or through

– Sets console port connection

– Sets Telnet connection parameters.

– Displays information on CPU utilization.

– Shows memory utilization parameters.

– Restarts the switch immediately, at a specified

Troubleshooting