Table of Contents
Advertisement
Chapter 4
| Interface Configuration
Port Configuration
Showing Port or Trunk
Statistics
Figure 37: Configuring Remote Port Mirroring (Intermediate)
Figure 38: Configuring Remote Port Mirroring (Destination)
Use the Interface > Port/Trunk > Statistics or Chart page to display standard
statistics on network traffic from the Interfaces Group and Ethernet-like MIBs, as
well as a detailed breakdown of traffic based on the RMON MIB. Interfaces and
Ethernet-like statistics display errors on the traffic passing through each port. This
information can be used to identify potential problems with the switch (such as a
faulty port or unusually heavy traffic). RMON statistics provide access to a broad
range of statistics, including a total count of different frame types and sizes passing
through each port. All values displayed have been accumulated since the last
system reboot, and are shown as counts per second. Statistics are refreshed every
60 seconds by default.
Note:
RMON groups 2, 3 and 9 can only be accessed using SNMP management
software.
– 104 –
Advertisement
Chapters
Table of Contents
