Cdr Generation Failed; Gn/S2A Interface Alarms - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

CDR generation failed

TABLE 83 CDR generation failed alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the web
interface
Description
Recommended Actions
NOTE
Refer to GA Interface Events

Gn/S2a Interface Alarms

NOTE
This section is not applicable for vSZ-H.
Following are the alarms related to Gn/S2a interface.
• GGSN restarted on page 98
• GGSN not reachable
• GGSN not resolved
• PDNGW could not be resolved
• PDNGW version not supported
• Associated PDNGW down
• Create session response failed
• Decode failed on page 101
• Modify bearer response failed
• Delete session response failed
• Delete bearer request failed
• Update bearer request failed
• CGF server not configured
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
CDR generation failed
cdrGenerationFailed
1615
Major
From the event code 1615 an alarm is raised for every event. A single event
triggers a single alarm.
"mvnoId"="2", "ctrlBladeMac"="aa:bb:cc:dd:ee:ff", "srcProcess"="cip",
"realm"="wlan.3gppnetwork.org", "radSrvrIp"="7.7.7.7", "SCGMgmtIp"="2.2.2.2"
Failed to generate CDR by RAD Server [{radSrvrIp}] in {produce.short.name}
[{SCGMgmtIp}]
This alarm is triggered when the controller is unable to format or generate certain
CDRs.
Manual intervention is required. Download the CIP process log file to check the
cause of the error.
on page 257.
on page 98
on page 98
on page 99
on page 99
on page 100
on page 100
on page 101
on page 101
on page 102
on page 102
on page 103
Alarm Types
Gn/S2a Interface Alarms
97