Alarm Types
Data Plane Alarms
TABLE 71 Data plane rebooted alarm (continued)
Alarm
Displayed on the web
interface
Description
Recommended Actions
Data plane packet pool is under low water mark
TABLE 72 Data plane packet pool is under low water mark alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Auto Clearance
Attribute
Displayed on the web
interface
Description
Recommended Actions
Data plane packet pool is under critical low water mark
TABLE 73 Data plane's packet pool is under critical low water mark alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the web
interface
Description
Recommended Actions
Data plane core dead
TABLE 74 Data plane core dead alarm
Alarm
Alarm Type
92
Data plane rebooted
Data plane [{dpName||dpKey}] rebooted
This alarm is triggered when the data plane is rebooted.
No action is required.
Data plane packet pool is under low water mark
dpPktPoolLow
516
Major
From the event code 516 an alarm is raised for every event. A single event
triggers a single alarm.
The alarm code is auto cleared with the event code 518.
"dpKey"="xx:xx:xx:xx:xx:xx", "id"="x"
Pool [{id}] on data plane [{dpName||dpKey}] is under low-water mark.
This alarm is triggered when the data core packet pool is below the water mark
level.
The operator needs to check for network looping.
Data plane packet pool is under critical low water mark
dpPktPoolCriticalLow
517
Critical
From the event code 517 an alarm is raised for every event. A single event
triggers a single alarm.
dpKey="xx:xx:xx:xx:xx:xx", "id"="x"
Pool [{id}] on data plane [{dpName||dpKey}] is under critical low-water mark.
This alarm is triggered when the data core packet pool reaches the critical water
mark level.
The operator needs to check for network looping.
Data plane core dead
dpCoreDead
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
Need help?
Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?
Questions and answers