No Ls Responses; Ls Authentication Failure - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Alarm Types
System Alarms
• Service unavailable
• Keepalive failure on page 127
• Resource unavailable
• HIP failed over on page 128
• GUID-B7CA4609-4792-42A3-B3E9-D7E58D606364
• Diameter initialization error
• Diameter peer transport failure
• Diameter CER error
• Diameter peer add error
• Diameter peer remove successful
• Diameter realm entry error
• Diameter failover to alternate peer
• Diameter fail back to peer
• Diameter CEA unknown peer
• Diameter no common application
• Process initiated on page 134
• PMIPv6 unavailable
• Memory allocation failed

No LS responses

TABLE 136 No LS responses alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the
SmartZone web interface
Description
Recommended Actions

LS authentication failure

TABLE 137 LS authentication failure alarm
Alarm
Alarm Type
Alarm Code
Severity
124
on page 127
on page 128
on page 129
on page 129
on page 130
on page 130
on page 131
on page 131
on page 132
on page 132
on page 133
on page 133
on page 134
on page 134
No LS responses
scgLBSNoResponse
721
Major
From the event code 721 an alarm is raised for every event. A single event
triggers a single alarm.
"ctrlBladeMac"="xx:xx:xx:xx:xx:xx", "url"="", "port"="", "SCGMgmtIp"=""
{produce.short.name} [{SCGMgmtIp}] no response from LS: url=[{url}],
port=[{port}]
This alarm is triggered when the controller does not get a response while
connecting to the location based service.
Check if location server is working properly.
LS authentication failure
scgLBSAuthFailed
722
Major
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A