Cgf Server Not Configured; Gr Interface Alarms; Destination Not Reachable - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

CGF server not configured

TABLE 96 CGF server not configured alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the web
interface
Description
Recommended Actions
NOTE
Refer to Gn/S2a Interface Events

GR Interface Alarms

NOTE
This section is not applicable for vSZ-H.
Following are the alarms related to GR interface.
•

Destination not reachable

• App server down
• App server inactive
• Association establishment failed
• Association down
• Outbound routing failure
• Did allocation failure
Destination not reachable
TABLE 97 Destination not reachable alarm
Alarm
Alarm Type
Alarm Code
Severity
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
CGF server not configured
cgfServerNotConfigured
1960
Major
From the event code 1960 an alarm is raised for every event. A single event
triggers a single alarm.
"mvnoId"="12" "ctrlBladeMac"="aa:bb:cc:dd:ee:ff" "srcProcess"="CIP"
"realm"= "NA" "ggsnIp"="10.10.10.10" "SCGMgmtIp"="2.2.2.2"
"radSrvrIp"="7.7.7.7" "cgfSrvrIP" = "1.1.1.1"
CGF server IP [{cgfSrvrIp}] received from PDN GW/GGSN with IP [{ggsnIp}] on
{produce.short.name} [{SCGMgmtIp}] is not configured
This alarm is triggered when the IP address of the CGF server received from
GGSN/PDNGW is not configured in the controller web interface and therefore is
not considered.
Check the controller web interface to ensure that the IP address of the CGF
server received from PDNGW/GGSN is configured. If it is not configure navigate
to Configurations > Services and Profiles > CGF Services to create the
configuration.
on page 259.
on page 103
on page 104
on page 104
on page 105
on page 105
on page 106
on page 106
Destination not reachable
destNotReacheable
1618
Critical
Alarm Types

GR Interface Alarms

103