Ap Image Signing Failed; Ap Lbs Events - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Events Types

AP LBS Events

TABLE 224 Classified Rogue AP event (continued)
Event
Severity
Attribute
Displayed on the web
interface
Description

AP image signing failed

TABLE 225 AP image signing failed event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
NOTE
Refer to AP Communication Alarms

AP LBS Events

The following are the events related to AP Location Based Service (LBS).
• No LS responses
• LS authentication failure
• AP connected to LS
• AP failed to connect to LS
• AP started location service
• AP stopped location service
• AP received passive calibration request
• AP received passive footfall request
• AP received unrecognized request
162
Classified Rogue AP
Warning
"apMac"="xx:xx:xx:xx:xx:xx", "rogueMac""=""xxx.xxx.xxx.xxx",
"ssid""="xxxxxxxxxx", "channel"="xx", "rogueType"="xxxxx",
"roguePolicyName"="xxxxx", "rogueRuleName"="xxxxx"
AP [{apName&&apMac}] has detected a rogue AP rogue AP[{rogueMac}] with
SSID[{ssid}] on channel[{channel}] classified as [{rogueType}] because of rogue
classification policy (policy[{roguePolicyName}], rule[{rogueRuleName}]).
This event occurs when the AP detects a rogue AP(malicious/known) that is
classified by configurable rogue policy and its rules.
AP image signing failed
apSigningInformation
187
Informational
"apMac"="xx:xx:xx:xx:xx:xx"
The AP[{apMac}] image signing failed with firmware version [{fwVersion}].
This event occurs when an AP image signing fails.
on page 65.
on page 163
on page 163
on page 163
on page 163
on page 164
on page 164
on page 164
on page 165
on page 165
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A