Emap Downlink Connected To Map; Emap Downlink Disconnected From Map - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Events Types
AP Mesh Events
• MAP downlink disconnected from EMAP
• RAP downlink connected to MAP
• MAP uplink connected to EMAP
• MAP uplink disconnected from EMAP
• MAP uplink connected to RAP
• MAP uplink connected to MAP
• Mesh state updated to MAP
• Mesh state updated to MAP no channel
• Mesh state updated to RAP
• Mesh state update to RAP no channel
• MAP downlink connected to MAP
• MAP downlink disconnected from MAP
• RAP downlink disconnected from MAP

EMAP downlink connected to MAP

TABLE 235 EMAP downlink connected to MAP event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

EMAP downlink disconnected from MAP

TABLE 236 EMAP downlink disconnected from MAP event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
166
on page 168
on page 168
on page 169
on page 169
on page 169
on page 170
on page 170
on page 170
on page 171
on page 171
on page 171
on page 171
on page 172
EMAP downlink connected to MAP
emapDlinkConnectWithMap
405
Informational
"emapMac"="xx:xx:xx:xx:xx:xx", "mapMac="xx:xx:xx:xx:xx:xx"
eMAP [{apName&&apMac}] accepted connection from MAP
[{mapName&&mapMac}].
This event occurs when mobile application part (MAP) to Ethernet Mesh AP
(EMAP) connection is successful.
EMAP downlink disconnected from MAP
emapDlinkDisconnectWithMap
406
Informational
"emapMac"="xx:xx:xx:xx:xx:xx", "mapMac="xx:xx:xx:xx:xx:xx"
MAP [{mapName&&mapMac}] disconnects from eMAP [{apName&&apMac}].
This event occurs when MAP disconnects from Ethernet Mesh AP
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A