TABLE 78 Data plane of data center side fails to connect to the CALEA server alarm (continued)
Alarm
Recommended Actions
Data plane fails to connects to the other data plane
TABLE 79 Data plane fails to connects to the other data plane alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the web
interface
Description
Recommended Actions
Data plane DHCP IP pool usage rate is 100 percent
TABLE 80 Data plane DHCP IP pool usage rate is 100 percent alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the web
interface
Description
Recommended Actions
NOTE
Refer to
Data Plane Events
GA Interface Alarms
NOTE
This section is not applicable for vSZ-H.
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
Data plane of data center side fails to connect to the CALEA server
Check the connectivity between data plane and CALEA server.
Data plane fails to connects to the other data plane
dpP2PTunnelConnectFail
1261
Major
From the event code 1261 an alarm is raised for every event. A single event
triggers a single alarm.
"dpKey"="xx:xx:xx:xx:xx:xx", "dpIP"="xx.xx.xx.xx",
"targetDpKey"="xx:xx:xx:xx:xx:xx", "targetDpIp"="xxx.xxx.xxx.xxx"
Data Plane[{dpName&&dpKey}] fails connects to the other Data
Plane[{targetDpKey&&targetDpIp}]
This alarm is triggered when the data plane fails to connect to another data plane.
Check the connectivity between data planes.
Data plane DHCP IP pool usage rate is 100 percent
dpDhcpIpPoolUsageRate100
1265
Critical
From the event code 1265 an alarm is raised for every event. A single event
triggers a single alarm.
"dpKey"="xx:xx:xx:xx:xx:xx"
Data Plane[{dpName&&dpKey}] DHCP IP Pool usage rate is 100 percent
This alarm is triggered when the data plane DHCP pool usage rate reaches 100%
Increase the size of the DHCP IP address pool, or reduce the number of stations
requiring addresses.
on page 243.
Alarm Types
GA Interface Alarms
95
Need help?
Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?