Ap Communication Alarms; Ap Rejected; Ap Configuration Update Failed - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

AP Communication Alarms

Following are the alarms related to access point communications.
•

AP rejected

on page 65
•

AP configuration update failed

• AP swap model mismatched
• AP pre-provision model mismatched
• AP firmware update failed
• AP WLAN oversubscribed
• AP join zone failed
AP rejected
TABLE 17 AP rejected alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Auto Clearance
Attribute
Displayed on the web
interface
Description
Recommended Actions
AP configuration update failed
TABLE 18 AP configuration update failed alarm
Alarm
Alarm Type
Alarm Code
Severity
fAggregation Policy
Auto Clearance
Attribute
Displayed on the web
interface
Description
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
on page 65
on page 66
on page 66
on page 66
on page 67
on page 67
AP rejected
apStatusRejected
101
Minor
From the event code 105 an alarm is raised for every event. A single event
triggers a single alarm.
The alarm is auto cleared with the event code 103.
"apMac"="xx:xx:xx:xx:xx:xx", "wsgIP"="xxx.xxx.xxx.xxx", "reason"="xxx"
{produce.short.name} [{wsgIP}] rejected AP [{apName&&apMac}] because of
[{reason}]
This alarm is triggered when the AP is rejected.
Check if the number of licenses has exceeded the limit. You would need to
purchase additional licenses, in case of insufficient licenses.
AP configuration update failed
apConfUpdateFailed
102
Major
From the event code 111 an alarm is raised for every event. A single event
triggers a single alarm.
The alarm is auto cleared with the event code 110.
"apMac"="xx:xx:xx:xx:xx:xx", "configID"="23456781234"
AP [{apName&&apMac}] failed to update to configuration [{configID}]
This alarm is triggered when the controller is unable to update the AP
configuration details.
Alarm Types
AP Communication Alarms
65