Events Types
Threshold Events
Rate limit threshold restored
TABLE 696 Rate limit threshold restored event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
Rate limit for TOR surpassed
TABLE 697 Rate limit for TOR surpassed event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
Auto Clearance
The number of users exceed its limit
TABLE 698 The number of users exceed its limit event
Event
Event Type
Event Code
330
Rate limit threshold restored
rateLimitThresholdRestored
1301
Informational
"mvnoId"=12 "wlanId"=1,"zoneId"="10" "ctrlBladeMac"="aa:bb:cc:dd:ee:ff"
"srcProcess"="radiusd" "UserName"=abc@xyz.com "realm"="wlan.3gppnetwor"
"SCGMgmtIp"="2.2.2.2" "aaaSrvrIp"="1.1.1.1" "AAAServerType"="Auth/Acct"
"ueMacAddr"="aa:bb:cc:gg:hh:ii" "MOR"=1000,"THRESHOLD"="500"
"TOR"="501"
Threshold restored for AAA Server [{aaaSrvrIp}] and ServerType
[{AAAServerType}]
This event occurs when the rate limit threshold is restored. The threshold limit for
this event is dependent on the maximum outstanding request (MOR) value as
configured in the web interface of Authentication or Accounting Service. For
example, if the MOR value is 1000, and threshold limit is set to 70%, then this
event will be raised when total outstanding requests for this server is lesser or
equal to 700.
Rate limit for TOR surpassed
rateLimitMORSurpassed
1302
Critical
"mvnoId"=12 "wlanId"=1,"zoneId"="10" "ctrlBladeMac"="aa:bb:cc:dd:ee:ff"
"srcProcess"="radiusd" "UserName"=abc@xyz.com "realm"="wlan.3gppnetwor"
"SCGMgmtIp"="2.2.2.2" "aaaSrvrIp"="1.1.1.1" "AAAServerType"="Auth/Acct"
"ueMacAddr"="aa:bb:cc:gg:hh:ii" "MOR"=1000,"THRESHOLD"="500"
"TOR"="501"
Maximum Outstanding Requests (MOR) surpassed for AAA Server [{aaaSrvrIp}]
and ServerType [{AAAServerType}]. Dropping requests to be proxied to AAA.
This event occurs when the rate limit for maximum outstanding requests (MOR) is
surpassed. The threshold limit for this event is dependent on the maximum
outstanding request (MOR) value as configured in the web interface of
Authentication or Accounting Service. For example, if the MOR value is 1000, and
threshold limit is set to 70%, then this event will be raised when total outstanding
requests for this server exceeds 1000.
This event triggers the alarm1302, which is auto cleared by the event code 1301.
The number of users exceed its limit
tooManyUsers
7001
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
Need help?
Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?