Ap Nat Failure Detected By Sz Due To Three (3) Consecutive Nat Gateway Aps Are Down; Ap Health High Airtime Utilization Flag; Ap Health High Airtime Utilization Clear - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

TABLE 297 NAT VLAN capacity restored detected by NAT gateway AP due to (at least) one out of the three (3)
consecutive NAT gateway AP IP were down is now up event (continued)
Event
Description
AP NAT failure detected by SZ due to three (3) consecutive NAT gateway
APs are down
TABLE 298 AP NAT failure detected by SZ due to three (3) consecutive NAT gateway APs are down event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

AP health high airtime utilization flag

TABLE 299 AP health high airtime utilization flag event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

AP health high airtime utilization clear

TABLE 300 AP health high airtime utilization clear event
Event
Event Type
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
NAT VLAN capacity restored detected by NAT gateway AP due to (at least) one
out of the three (3) consecutive NAT gateway AP IP were down is now up
gateway IPs which were down. The NAT traffic for affected clients is restored
back.
This event occurs when the AP detects at least one of the three (3) consecutive
gateway APs IPs that had failed is now UP.
AP NAT failure detected by SZ due to three (3) consecutive NAT gateway APs are
down
apNATFailureDetectedbySZ
346
Critical
"apMac1"="xx:xx:xx:xx:xx:xx", "apMac2"="xx:xx:xx:xx:xx:xx",
"apMac3"="xx:xx:xx:xx:xx:xx"
NAT failure detected by SZ since three (3) consecutive NAT gateway IPs are
down AP1=[{apMac1}] AP2=[{apMac2}] AP3=[{apMac3}] (All consecutive NAT
APs are down in case of less than 3 NAT Gateway APs configured). The NAT
traffic for some of the clients may get affected for the respective VLANs.
This event occurs when the controller detects three (3) consecutive failures of
NAT server APs.
AP health high airtime utilization flag
apHealthAirUtilizationFlag
347
Warning
"apName"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx", "currentValue"="xxxxx",
"configuredThreshold"="xxxxx", "radio"="X.XG"
AP [{apName&&apMac}] flagged {{radio}} airtime utilization health [{currentValue}]
because it crossed the threshold [{configuredThreshold}].
This event occurs when an AP is flagged because the radio has crossed the
latency health threshold configured by the administrator.
AP health high airtime utilization clear
apHealthAirUtilizationClear
Events Types
AP State Change Events
187