Vlan Configuration Mismatch On Dhcp/Nat Wlan - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

TABLE 66 VLAN configuration mismatch on non DHCP/NAT WLAN alarm (continued)
Alarm
Description

VLAN configuration mismatch on DHCP/NAT WLAN

TABLE 67 VLAN configuration mismatch on DHCP/NAT WLAN alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the web
interface
Description
NOTE
Refer to Configuration Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
VLAN configuration mismatch detected between configured and resolved VLAN
with DVLAN/VLAN pooling configuration on non-DHCP/NAT WLAN
This alarm is triggered when the AP detects a non DHCP/NAT WLAN. VLAN
configuration mismatches with DVLAN/VLAN pooling configuration on gateway
AP.
VLAN configuration mismatch detected between configured and resolved VLAN
with DVLAN/VLAN pooling configuration on DHCP/NAT WLAN
apCfgDhcpNatWlanVlanConfigMismatch
1025
Critical
From the event code 1023 an alarm is raised for every event. A single event
triggers a single alarm.
"ssid"="xxxx", "wlanID"="xxxx", "configuredVlan"="5", "vlanId"="11",
"apMac"=""xx:xx:xx:xx:xx:xx"
DHCP/NAT gateway AP [{apMac}] detected VLAN configuration mismatch on
DHCP/NAT WLAN [{ssid}]. Configured VLAN is [{configuredVlan}] and resolved
VLAN is [{vlanId}]. Clients may not be able to get IP or access Internet.
This alarm is triggered when the AP detects a DHCP/NAT WLAN. VLAN
configuration mismatches with DVLAN/VLAN pooling configuration on gateway
AP.
on page 240.
Alarm Types
Configuration Alarms
89