Cluster Alarms; New Node Failed To Join - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Alarm Types

Cluster Alarms

Cluster Alarms

Following are the alarms related to cluster.
•

New node failed to join

• Node removal failed
• Node out of service
• Cluster in maintenance state
• Cluster backup failed
• Cluster restore failed
• Cluster upgrade failed
• Cluster application stopped
• Node bond interface down
• Node physical interface down
• Cluster node rebooted
• Cluster node shut down
• Disk usage exceed threshold
• Cluster out of service
• Cluster upload AP firmware failed
• Cluster add AP firmware failed
• Unsync NTP time
• Cluster upload KSP file failed
• Configuration backup failed
• Configuration restore failed
New node failed to join
TABLE 43 New node failed to join alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Auto Clearance
Attribute
Displayed on the web
interface
Description
Recommended Actions
78
on page 78
on page 79
on page 79
on page 80
on page 80
on page 81
on page 81
on page 82
on page 82
on page 83
on page 83
on page 83
on page 84
on page 84
on page 85
on page 85
on page 85
on page 86
on page 86
on page 86
New node failed to join
newNodeJoinFailed
801
Critical
From the event code 803 an alarm is raised for every event. A single event
triggers a single alarm.
The alarm code is auto cleared with the event code 802.
"clusterName"="xxx", "nodeName"="xxx",
"nodeMac"=" xx:xx:xx:xx:xx:xx"
New node [{nodeMac}] ([{nodeName}]) failed to join cluster [{clusterName}]
This alarm is triggered when a node fails to join a cluster session. The web
interface displays the error message.
When the operation fails, the user can run the join process. If it continues to fail,
please send the complete system log files (stored in the path -
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A